This page contains the official guides for installing and securely mounting the CC-Link device in a vehicle.
Because the CC-Link device comes in a few different versions, the installation steps vary slightly. First, you will need to identify which version you are working with.
Step 1: Identify Your CC-Link Device
Take a look at the two devices in the pictures on your screen:
If you have the device shown on the left, follow the First Guide.
If you have the device shown on the right, follow the Second Guide.
⚠️ CRITICAL STEP: Always write down the serial number from the CC-Link device's sticker onto the physical job card before you install it! You will need this number to register the car later.
Step 2: Choose the Correct Installation Guide
Different versions of the CC-Link device require different installation methods to connect properly to the car's system. Please select the correct link below based on your device version:
[Download Guide for Version 1 (Left Image)]
[Download Guide for Version 2 (Right Image)]
Step 3: Specific Vehicle Model Guides
Some vehicle models have unique mounting locations or specific wiring paths.
[Click here to access our shared drive for specific vehicle installation guides.]
Need Help?
If you cannot find the guide for a specific model, or if you need any extra help installing a CC-Link device, please contact our support team using the chat icon in the bottom left-hand corner of your screen.